1. Do you carry this make, model, and year in precut tint? 2. Does the rear window come as one piece, or in strips? 3. Do you have windshield strips (sunstrips) available? 4. What about tint for the sunroof, do you have it? 5. Do you sell fader tint or colors other than charcoal? 6. What is the legal limit in my state? 7. Do you do installations? 8. What kind of warranty do you offer? 9. How do I remove old nasty tint? 10. Will your tint change color or fade after a while? 11. Can you sell individual pieces? 12. What does shipping cost? 13. What brand of tint do you use? 14. What are the technical specifications of the film? 15. My vehicle has factory tint on the rear windows, what shade would match the factory tint?

16. How hard is it to install precut window tint? 17. How does aftermarket tint look when compared to factory tint? 18. How do I avoid getting white splotches where the dot matrix is? 19. My precut film came with what looks like wrinkles, is this ok? 20. Is precut window tint cut to the exact size of my windows? 21. What is the difference between Pro Series SR, Deluxe Laminated SR, and High Performance SR films? Don't see your question here? Let us know and we'll add it here!

Do you carry this make, model, and year in precut tint? Most likely. CLICK HERE to see a list of all the makes, models, and years we are currently able to supply you with.

Does the rear window come as one piece or in strips? With the exception of trucks with sliding rear windows, all windows come as one piece.

Do you have windshield strips (sunstrips) available? For most vehicles we do have sunstrips available. These are not included in the listings, but can be purchased seperately. Look in our ebay store for the section on sunstrips.

What about the sunroof, do you have tint for those too? We do not provide sunroof tint at this time.

Do you sell fader tint or colors other than charcoal? At this current time we do not offer colors other than charcoal for our precut tint sets. This includes holographic films as well as mirrored film.

What is the legal limit in my state? Please CLICK HERE for a list of legal limits by state

Do you do Installations? Yes. We are a fully licensed and insured limited liability company. If you're willing to make the trip, we're willing to install it for you. Please EMAIL US for more information. Or VISIT OUR IN-SHOP PAGE for more details.

What kind of warranty do you offer? The film comes with a guarantee not to peel, bubble, crack, or fade when installed by a licensed professional and maintained correctly. Due to the fact that most customers are not licensed professionals, we can only guarantee that the film will arrive to you undamaged. If you are a licensed professional, then all guarantees apply. We will ask you to return the disfunctional film for inspection before processing your claim, along with the required documents, if any, to prove that you are operating a licensed tint shop.

How do I remove old nasty tint? Very Carefully. CLICK HERE for instructions.

Will your tint fade after a while? NO!

Do you have windshield strips (sunstrips) available? For most vehicles we do have sunstrips available. These are not included in the listings, but can be purchased seperately. Look in our ebay store for the section on sunstrips.

Do you sell individual pieces? We sure do. Please EMAIL US and tell us what you need. We'll be glad to help.

What does shipping cost? Please refer to the Ebay listing you are questioning about, the shipping costs for our products are stated in every listing. We ship in SECURE packaging and Ship ONLY USPS Priority Mail, with the exception of larger orders of Tint by the Roll... which may ship UPS Ground due to size restrictions set forth by the USPS.

What brand of tint do you use? Our film is manufactured by one of the worlds largest and most respected automotive solar films manufactures for use under our own label, Northern Films.

What are the technical specifications of the film you use? Please refer to the chart below. PROFESSIONAL SERIES SR FILMS Film Type Visible Light Trans- mitted Visible Light Reflected UV Rejected Total Sol. Energy Rejected Total Sol. Energy Trans- mitted Total Sol. Energy Reflected Total Sol. Energy Absorbed Shading Coefficient Emissivity Adhesive 5% 5% 7% 99% 65% 17% 11% 72% 0.42 0.85 P.S. 20% 24% 7% 99% 54% 30% 11% 59% 0.53 0.80 P.S. 35% 35% 7% 99% 47% 39% 10% 51% 0.61 0.80 P.S. 50% 51% 9% 99% 44% 45% 11% 47% 0.68 0.80 P.S.

My vehicle has factory tint on the rear windows, what shade would match the factory tint? On most vehicles the factory tint shade is between 15% and 20%. We suggest you take a look at the state laws link we provide to see what is legal in your area on the front side windows to avoid any problems.

How hard is it to install precut window tint? That question really depends on the vehicle and the compound curves of the windows. For most vehicles side windows are not a problem and require little, if any, heat shrinking. Rear windows will require heat shrinking if there is any curve to them at all. Please check out our installation instructions by CLICKING HERE That will give you an idea of the techniques and procedures you will need to do to successfully install your precut tint.

How does aftermarket tint look when compared to factory tint? It depends on the quality of the installation. If the windows are cleaned properly and the film is installed properly it will be very difficult to tell the difference. Contamination, creased film, and the dot matix are the major issues tinters have to deal with. The best way to deal with contamination is to clean everything before installing the film, and work in a dirt free / dust free / wind free enclosure. Handle the film carefully and avoid creases. For the dot matrix, elmer's school glue gel can be used to 'fill in' the air pockets while installing.

How do I avoid getting white splotches where the dot matrix is? Elmer's School Glue Gel. It comes blue, but dries clear. When installing your rear window film, first heat shrink as you normally would to form it, the install it as you normally would EXCEPT don't squeegee hard over the dot matrix pattern. Once the film is in place and the rest of the water is squeegeed out, pull back the film that is over the dot matrix pattern, and put a thin bead of Elmer's School Glue Gel at the bottom of the matrix pattern, then lightly lay the film back down. With your hard card 'push' the glue in an even pattern to the top of the matrix pattern. Be careful when you get to the top of the pattern and the edge of the film, as the glue will make a mess, so have a paper towel handy to catch the access. Don't push too hard and remove all the glue, you want to leave enough under the film to fill in the air pockets between the dots on the matrix pattern.

My precut film came with what looks like wrinkles, is this ok? Wrinkles will come out during the installation process, as long as the film doesn't have a hard crease in it you'll be fine. What's the difference? A hard crease is permanent and will leave a white mark after the film is installed and viewed from the outside, a wrinkle will smooth out.

Is precut tint cut to exact size for my windows? Yes. At first you may think it's cut too large for your windows, but keep in mind that aftermarket window tint also goes behind the weather stripping and gaskets so there are no light leaks and the rear window needs to be heat shrunk to be formed in order fit the curve of the window.

What is the difference between Pro Series SR, Deluxe Laminated SR, and High Performance SR films? HIGH PERFORMANCE: Top Quality and color stability. 1.5 mils thick, 2-ply, laminated metallized layer for high solar reflectivity and color stability, and a hardcoat layer for scratch resistant protection. Life-time warranty against Bubbling, crazing, cracking, peeling, or color fade when installed and maintained properly. DELUXE LAMINATED: 1.5 mils thick, 2-Ply, non-metallized laminated layer for increased color stability, and a hardcoat layer for scratch resistant protection. 2 year warranty against Bubbling, crazing, cracking, peeling, or color fade when installed and maintained properly. PRO SERIES SR: 1 mil thick. Non-Metallized, non-laminated, single ply. 2 year warranty against Bubbling, crazing, cracking, or peeling when installed and maintained properly.